Siemens ACUSON Freestyle Скачать руководство пользователя страница 111

Страница: 111 / 138

ACUSON

Freestyle User Manual

6-3

Wireless Probes

Overview

When the system is operated in “wireless mode” the probe Cable Adapter is not used;

instead, the probe and console communicate wirelessly. To obtain successful results scanning

wirelessly, follow the instructions provided here.

NOTE:

Consult the Safety chapter and System Reference manual for important

information about wireless operation and electromagnetic compatibility issues

associated with the system.

NOTE:

See the Safety chapter and System Reference manual for important

information about the ACUSON

Freestyle wireless probe specifications,

electromagnetic compatibility considerations, and security features.

Antenna Locations

The probe antennas are located towards the back of the probe (the back is the part with the

probe controls). If possible, keep your hand away from this area for optimal operation.
Additional antennas are also located in the midsection of the probe.
The system antennas are located in the upper left corners of the console. Maintain an

unblocked line of sight between the probe and the console for optimal operation.

Location of Probe Antennas on Probe and Console

1. Probe antennas
2. Console antennas

Содержание ACUSON Freestyle











































































































































Результаты поиска

Содержание ACUSON Freestyle

Отзывы:

Siemens ACUSON Freestyle, Руководство пользователя, Страница: 111 / 138

Результаты поиска

Содержание ACUSON Freestyle

Отзывы: