Siemens ACUSON Freestyle Скачать руководство пользователя страница 107

Страница: 107 / 138

ACUSON

Freestyle User Manual

5-17

Scanning

Area Measurement

To perform an area measurement:
1. Activate the Area function by selecting

AREA

from the

MEASURE

sub-menu.

2. Position the cross-hair cursor at the starting point by pressing the left Trackball button.

NOTE:

If you have selected the continuous trace method in the

SETUP

SYSTEM

ADMIN

page, use the Trackball to trace the area.

3. While drawing you can reverse direction using the right Trackball key to back up and

delete parts of the trace. If you have selected the point-to-point method in the

SETUP

SYSTEM

ADMIN

page (by disabling Continuous Trace), use the Trackball to position the

cursor, and the left Trackball button to set multiple points.

To complete the measurement, leave at least a small gap between your finishing point

and the starting point, and press the left Trackball button twice. The system will complete

the trace and display the result next to the trace.

NOTE:

It is possible to perform measurements on images being viewed from the

Study List, but the measurements cannot be saved in this case.

Содержание ACUSON Freestyle











































































































































Результаты поиска

Содержание ACUSON Freestyle

Отзывы:

Siemens ACUSON Freestyle, Руководство пользователя, Страница: 107 / 138

Результаты поиска

Содержание ACUSON Freestyle

Отзывы: