ACUSON Cypress™ Operator’s Manual
6-5
Cardiac Calculations Setup
How to Edit the Estimated Value While Performing a
Calculation
To make a one-time change to an estimated value (the system will revert back
to the setup default after this calculation), follow these steps while performing a
calculation:
1.
Click the field. For example, click [
PRESSURE
] to display the default esti-
mated RA Pressure of 10 that was specified in the
Setup
menu.
2.
Click [
PRESSURE
] a second time to open the edit box.
3.
Type in a new estimate and click the [
SET
] button.
Selecting a Report Format
1.
Press the
SETUP
key and click the
Calculations
heading.
2.
Click
Reports
. Select either the
Complete
format or the
Configured
format.
A report in the
Complete
format displays the entire report, including sec-
tions with open data fields.
The
Configured
format displays only the sections where data has been
entered.
Selecting a Report Background Color
1.
Press the
SETUP
key and click the
Calculations
heading.
2.
Click
Reports
.
3.
Select a color.
Using the Averaging Function
When averaging is turned
ON
, measurements that are part of the patient report
will automatically display the averaged result when two or more of the same
measurements are completed. To turn averaging
ON
, follow these steps:
1.
Press the
SETUP
key and double-click the
Calculations
heading.
2.
Highlight
Averaging
. A checkmark indicates if the averaging function is
active. If it is not, click the checkbox to turn averaging
ON
. (To turn averaging
OFF
, click the checkbox to remove the checkmark.)
NOTE Averaging can be activated or deactivated on a per-study basis using
the patient information screen independent of the system wide selec-
tion in the Setup Menu.
