Siemens A80672 Скачать руководство пользователя страница 121

Страница: 121 / 128

SYSTEM MANAGEMENT

_______________________________________________________________________________________________________________

A-3

SIG-00-13-12 February 2021
Version No.: B

A.3

GET_DAIG, GET_EVENTS

get_diag [-t <hours>]

Print the last <hours> worth of diagnostic log entries.

Figure 5-7 Get_Diag Example

get_diag [-s <time>] [-e <time>]

Print diagnostic log entries in the given date/time range.

get_events [-t <hours>]

Print the last <hours> worth of event log entries.

get_events [-s <time>] [-e <time>]

Print event log entries in the given date/time range.

A.3.1. Description

The get_diag command returns the contents of the system’s diagnostic log. The diagnostic log contains detailed

information about the internal workings of the PTC Console. The get_events command returns the contents of

the event log, which contains the application level view of the operation of the location. Both commands allow

the user to specify a date/time range of entries to return. If the command is used without arguments, the entire

log is returned.

-t <number_of_hours>

Prints the last

<number_of_hours>

worth of log entries. For example,

get_events –t 24

would display

the last 24 hours of events in the event log.

-s YYYY-MM-DD hh:mm:ss -e YYYY-MM-DD hh:mm:ss

Prints the entries in the given date/time range. The –s specifies the start time and the –e specifies the end time.

Times must be specified in 24 hour format. If no date and time given after –s or -t, starting time defaults to the

beginning of the log and ending time defaults to the end of the log. If you omit the time portion of the date and

time, it defaults to midnight. If you omit the date portion, it defaults to today.

Содержание A80672

































































































































Результаты поиска

Содержание A80672

Отзывы:

Похожие инструкции для A80672

Бренды по названию

Популярные бренды

Siemens A80672, Руководство по установке и эксплуатации

Результаты поиска

Содержание A80672

Отзывы:

Похожие инструкции для A80672

Бренды по названию

Популярные бренды