![Siemens A31008-M1026-R101 Скачать руководство пользователя страница 13](http://html.mh-extra.com/html/siemens/a31008-m1026-r101/a31008-m1026-r101_manual_383289013.webp)
12
Basic Setup
Gigaset WLAN Camera / english / A31008-M1026-R101-2-7619 / Basic_setup.fm / 19.04.2005
Sc
hablone 2004_12_27
ì
Power up.
– Connect the supplied power adapter to the Gigaset WLAN Camera and power up.
Use only the power adapter provided. Using a different one may cause hardware
damage.
ì
Check the LEDs.
– The
Ready LED
will turn on briefly, then start blinking. It will blink during startup,
which takes 15 to 20 seconds.
When startup is completed, the
Ready LED
should remain
ON
.
– The
Active LED
should be
OFF
.
It will flash when anyone is viewing live video.
– Either the
LAN LED
OR the
Wireless LED
should be
ON
.
Uninstalling Software
Before you install the Gigaset WLAN Camera software, you have to uninstall former ver-
sions of the software.
ì
Shut down all currently running programs.
ì
Open the control panel of your operating system.
ì
Double click Add/Remove Programs.
ì
Highlight the software, that should be uninstalled, and click Install/Uninstall (or
Change/Remove).
ì
Follow the prompts to uninstall the software.
Installing the Gigaset WLAN Camera
Installation information
u
In the Windows 2000 and Windows XP operating systems, you must be logged in as
a user with administration rights. Contact your system administrator for details if
necessary.
u
Before installing the Gigaset Wireless Camera software, read the information under
"System Requirements" on page 10.
Configuring with the Basic Setup
Initial setup should be performed using the supplied Windows-based setup wizard. This
program can locate the Gigaset WLAN Camera even if its IP address is invalid for your
network. You can then configure the Gigaset WLAN Camera with appropriate TCP/IP set-
tings for your LAN.
Subsequent administration can be performed with your web browser, as explained in
the chapter "Advanced Viewing Setup" on page 20.