Siemens 9810 Series, Руководство пользователя, Страница: 15 / 218

Meter overview
Simple
configuration
Highly accurate
metering
Trending and
forecasting
Alarming and
alerting
Time of use
Cost allocation/tenant billing
Powerful
customization
Inputs/outputs
Power quality
monitoring
Energy
efficiency
Asset and network
management
Measure
Act
Easy access
to information
Configurable
security
Perform basic setup using ION Setup, meter webpages
or the display.
Customize meter functionality using the power of ION.
Access highly accurate measurements and calculations for a
wide variety of power system values.
Use the onboard or expansion I/O for non-critical control,
WAGES and input metering, energy pulsing and system
monitoring, for example, breaker status.
Receive notifications of predefined meter and system events
or create custom alarms.
Configure meter to help protect against unauthorized
configuration of your meter and access to your meter’s data.
Data and event
logging
Easily access information after basic configuration using:
• a variety of industry-standard protocols.
• the touch-screen display.
• WinPM.Net software.
• meter webpages that can be customized to suit your needs.
• the meter’s gateway feature to access downstream devices.
Track the trends for power system values over time to
understand: energy usage patterns, optimize network capacity
and forecast future usage.
Improve energy efficiency and track compliance to green
standards.
Help prolong asset life with proactive network management.
Time of use and perform cost allocation/tenant billing.
Log data in a number of onboard default logs, or customize
your meter to log other parameters, and access that
information using software or webpages.
• Monitor compliance to a variety of power quality standards
using the meter’s highly accurate metering.
• Use the meter’s setpoint learning feature to learn your
power system’s normal operating values.
• Locate disturbances using disturbance direction detection.
Understand
Communications
Supported protocols
Your meter’s fundamental protocol and architecture is ION.
You can integrate the meter into various industry-standard networks. Data that the
meter measures can be made available to other devices using Modbus, DNP 3.0,
DLMS and SNMP as well as the MV-90 translation system. You can configure the
meter to import data from other devices on these networks. Your meter supports
the IEC 61850 protocol and COMTRADE waveform data format.
Your meter also supports IPv6, DPWS and RSTP Ethernet protocols.
7EN05-0390-00 15