Siemens 9810 Series, Руководство пользователя, Страница: 127 / 218

Alarms and alerts
Name Priority Description Default
Transient/Waveshape High Transient alarm Disabled
Digital In Info Only Digital input alarms
Number of alarms determined by the total number of
available digital inputs
NOTE: Info Only alarms are not displayed.
Enabled
Alarm information
You can view information about an alarm from your meter’s display.
Only alarms with a priority of low, medium or high are displayed.
Parameter Description
Alarm The name of the alarm (for example, Over THD V1).
Priority Low, medium or high alarm priority.
Date The date and time the alarm was triggered.
Duration The duration of the alarm (only applies to inactive alarms).
Ack The date and time when the alarm was acknowledged (only applies to
acknowledged alarms).
Value Active alarm: The minimum or maximum value detected when the alarm was
triggered.
Historic alarm: The minimum or maximum value detected during the duration of
the alarm.
Viewing and acknowledging alarms using the display
You can view and acknowledge alarms using your meter’s display
1. Press the Home button on the display.
2. Navigate to Alarms > Active Alarms or Historical Alarms .
3. Press Select.
4. Press the up or down icons to navigate alarms. A gray bar appears behind the
active selection.
NOTE: You can press Info to display alarm details.
5. To acknowledge alarms:
– Press Acknowledge All, or
– Press the up and down icons simultaneously.
Alarm configuration
Alarm setup using the display
You can enable and disable alarms through the display.
7EN05-0390-00 127