Before switching on the supply voltage
• The flammability class of the wires conforms to safe operation according to VW-1.
• You are using the supplied terminal.
• A two-core cable with a cable cross-section of 0.75 mm
2
to 2.5 mm
2
.
• A slotted screwdriver with a 3 mm blade.
Procedure
1. Switch off the supply voltage.
2. Connect the lines to the connecting ter‐
minal as shown.
Take the polarity into account.
3. Connect the terminal to supply voltage
connection.
ದ
'&9*1'
'&9
6.6
Connecting Ethernet to SITRANS CC240
①
LAN interface X1P1LAN: Intranet, e.g., SITRANS CC240 web server or OPC UA client and
Internet, e.g., MindSphere
②
LAN interface X2P1LAN is not used.
6.7
Securing the cables
Use cable ties or cable clamps to secure the connected cables to suitable fastening elements to
ensure strain relief.
Do not squeeze cables through cable ties or cable clamps.
Connecting
6.7 Securing the cables
SITRANS CC240 and SITRANS MX300
Operating Instructions, 06/2021, A5E47280695-AB
49
