WARNING
Improper device modifications
Risk to personnel, system and environment can result from modifications to the device,
particularly in hazardous areas.
• Only carry out modifications that are described in the instructions for the device. Failure to
observe this requirement cancels the manufacturer's warranty and the product approvals.
3.4
Requirements for special applications
Due to the large number of possible applications, each detail of the described device versions for
each possible scenario during commissioning, operation, maintenance or operation in systems
cannot be considered in the instructions. If you need additional information not covered by
these instructions, contact your local Siemens office or company representative.
Note
Operation under special ambient conditions
We highly recommend that you contact your Siemens representative or our application
department before you operate the device under special ambient conditions as can be
encountered in nuclear power plants or when the device is used for research and development
purposes.
WARNING
Commissioning and operation with pending error
If an error message appears, correct operation in the process is no longer guaranteed.
• Check the gravity of the error.
• Correct the error.
• If the error still exists:
– Take the device out of operation.
– Prevent renewed commissioning.
Safety notes
3.4 Requirements for special applications
SITRANS CC240 and SITRANS MX300
Operating Instructions, 06/2021, A5E47280695-AB
27
