Installation Guide
UMSITRPDS3-1
INTRODUCTION
This installation guide contains an outline of the procedures to be used to mechanically and electrically
install Siemens SITRANS
TM
P Series DSIII Pressure Transmitters. It is intended for use by experienced
installers. Detailed information needed to bench test, install, configure, calibrate, and service a transmitter
is included in User’s Manual UMSITRPDS3-1. Detailed product specifications are also included in the
User’s Manual.
The User’s Manual is supplied on the Siemens Process Instrumentation User Manual CD, included with a
Series DSIII transmitter shipment. To access UMSITRPDS3-1 on the supplied Siemens Process
Instrumentation User Manual CD, perform the brief procedure below. The manual is in Portable
Document Format (PDF). A link for downloading the free Adobe Reader is provided.
1.
Insert the Siemens Process Instrumentation User Manual CD into the CD drive in a PC.
2.
If autorun is enabled, a menu of available manuals will appear. Click on the link to the desired
manual.
If autorun is not enabled, go to
Start
>
Run
and browse to the CD drive. Double click on
Autorun.exe
and then click
Run
to display the menu of available manuals.
Note
Additional information about transmitters discussed in this guide, and about SITRANS P
transmitter models and options not included in this guide, can be found in the Siemens
Process Automation catalog: Field Instruments for Process Automation.
Product Description
SITRANS P Series DSIII transmitters provide reliable, accurate, stable, and cost-effective measurement
of differential, absolute, and gauge pressure and liquid level.
Figures 1 through 4 show the basic transmitter models and optional mounting bracket kits. Transmitter
dimensions are provided in the User’s Manual. Measuring cell construction determines a transmitter’s
physical dimensions and mechanical installation. Note that a given sensor construction can involve one or
more measurement methods, as shown in Table 1.
TABLE 1 Measurements, Models and Figure References
Measurement
Model And Measuring Cell Construction
Refer to
Pressure
Pressure/Absolute
Absolute Pressure
7MF4033, Gauge Construction
7MF4133, Gauge Construction
7MF4233, Gauge Construction
Figure 1
Figure 9
Figure 1
Absolute Pressure
7MF4333, Differential Construction
Figure 2
Differential Pressure
Differential Pressure
7MF4433, Differential Construction
7MF4533, Differential Construction
Figure 3
Liquid Level (Flange)
Liquid Level (Flange)
7MF4633, Flange Construction
7MF4812, Flange
Figure 4
4
February
2012
