manualshive.com logo in svg

Siemens 7ME6810, Руководство по эксплуатации, Страница: 44 / 170

Поделиться
Скачать
Siemens 7ME6810 Скачать руководство пользователя страница 44

6.2

Initial commissioning via SIMATIC PDM

6.2.1

Check SIMATIC PDM version

Procedure

1. Go to SIMATIC PDM Download (

http://www.siemens.com/simaticpdm/downloads

).

2. Check the support page to make sure you have:

– The latest version of SIMATIC PDM
– The most recent Service Pack (SP)
– The most recent hot fix (HF)

6.2.2

Updating the Electronic Device Description (EDD)

Procedure

1. Check that the EDD revision match the Firmware revision in the device according to the 

table in section Document history (Page 8).

2. Go to the support page Software downloads (

https://www.siemens.com/

processinstrumentation/downloads

).

3. Enter the product name in the field "Enter search term...".
4. Download the most current EDD of your device.
5. Save files to your computer in an easily accessed location.
6. Launch SIMATIC PDM – Device Integration Manager.

From the File menu, click "Read device descriptions from compressed source...".

7. Browse to the zipped EDD file, select and open it. 
8. Use the "Integration" function to integrate the EDD into the device catalog. The EDD is now 

accessible via SIMATIC Manager.

This chapter describes how to install the PDM device driver (EDD). The newest EDD driver is 

available on the internet (

http://support.automation.siemens.com/WW/view/en/

19701862/133100

).

The PDM device driver (EDD) is compatible with PDM 6, PDM 8 and PDM 9.
Install the EDD files from SIMATIC PDM "Manage Device Catalog" via the following steps:
Windows START menu → program folder "SIMATIC" → SIMATIC PDM → Manage device 

catalog.

Commissioning
6.2 Initial commissioning via SIMATIC PDM

SITRANS FM MAG 8000

44

Operating Instructions, 03/2020, A5E03071515-AH

Содержание 7ME6810











































































































































































Отзывы:

Нет отзывов