Siemens 7ME652 Скачать руководство пользователя страница 44 | Manualshive

Страница: 44 / 86

Siemens 7ME652 Скачать руководство пользователя страница 44

Additional Support

If you have additional questions about the device, please contact your local Siemens

representative and offices at:
Local contact person (

http://www.automation.siemens.com/partner

6.5

Transportation and storage

To guarantee sufficient protection during transport and storage, observe the following:
● Keep the original packaging for subsequent transportation.
● Devices/replacement parts should be returned in their original packaging.
● If the original packaging is no longer available, ensure that all shipments are properly

packaged to provide sufficient protection during transport. Siemens cannot assume liability

for any costs associated with transportation damages.

NOTICE
Insufficient protection during storage
The packaging only provides limited protection against moisture and infiltration.
● Provide additional packaging as necessary.

Special conditions for storage and transportation of the device are listed in Technical data

Handling

Figure 6-2

Handling of sensor

6.6

Return procedure

Enclose the bill of lading, return document and decontamination certificate in a clear plastic

pouch and attach it firmly to the outside of the packaging.

Service and maintenance
6.6 Return procedure

SITRANS FM MAG 5100 W

44

Operating Instructions, 01/2020, A5E03063678-AC

«
...
42
43
44
45
46
...
»

Содержание 7ME652























































































Отзывы:

Нет отзывов