Siemens 7ME3510, Руководство по эксплуатации, Страница: 124 / 214

Maintenance and service
9.5 Disposal
FUP1010 IP67 Portable
122
Operating Instructions, 03/2012, A5E02951522-02
9.5 Disposal
Devices identified by this symbol may not be disposed of in the
municipal waste disposal services under observance of the
Directive 2002/96/EC on waste electronic and electrical
equipment (WEEE).
They can be returned to the supplier within the EC or to a
locally approved disposal service. Observe the specific
regulations valid in your country.
9.6 Return procedures
Enclose the delivery note, the cover note for return delivery and the declaration of
decontamination form on the outside of the package in a well-fastened clear document
pouch.
Required forms
● Delivery Note
● Cover Note for Return Delivery with the following information
Cover note (
http://support.automation.siemens.com/WW/view/en/16604370 )
– product (ordering number)
– number of devices or spare parts returned
– reason for the return
● Declaration of Decontamination
Declaration of Decontamination
( http://pia.khe.siemens.com/efiles/feldg/files/Service/declaration_of_decontamination_en.
pdf )
With this declaration you certify
that the returned products/spare parts have been
carefully cleaned and are free from any residues.
If the device has been operated together with toxic, caustic, flammable or water-
damaging products, clean the device before return by rinsing or neutralizing. Ensure that
all cavities are free from dangerous substances. Then, double-check the device to ensure
the cleaning is completed.
We shall not service a device or spare part unless the declaration of decontamination
confirms proper decontamination of the device or spare part. Shipments without a
declaration of decontamination shall be cleaned professionally at your expense before
further proceeding.
You can find the forms on the Internet and on the CD delivered with the device.