Siemens 7ME305 Скачать руководство пользователя страница 8

Страница: 8 / 124

Edition

Remarks

FW versions

EDD version

05/2014

• Diagnostics section improved
• Specific PROFIBUS description add‐

• Description of new functions add‐

• General update according to FW

update

3.00.00

2.00.00

04/2009

First edition

2.01.0

1.00.01

1.4

Designated use

Use the device in accordance with the information on the nameplate and in the Technical
specifications (Page 79).

1.5

Checking the consignment

1. Check the packaging and the delivered items for visible damages.

2. Report any claims for damages immediately to the shipping company.

3. Retain damaged parts for clarification.

4. Check the scope of delivery by comparing your order to the shipping documents for

correctness and completeness.

WARNING

Using a damaged or incomplete device

Risk of explosion in hazardous areas.
• Do not use damaged or incomplete devices.

1.6

Items supplied

• SITRANS FUS060
• Wall mounting bracket (standard only)
• SITRANS F documentation disk
• Quick Start guide

Introduction
1.6 Items supplied

SITRANS FUS060 with PROFIBUS PA

Operating Instructions, 09/2021, A5E02225054-AD

Содержание 7ME305





























































































































Результаты поиска

Содержание 7ME305

Отзывы:

Siemens 7ME305, Руководство по эксплуатации, Страница: 8 / 124

Результаты поиска

Содержание 7ME305

Отзывы: