manualshive.com logo in svg

Siemens 7ME305, Руководство по эксплуатации, Страница: 64 / 124

Поделиться
Скачать
Siemens 7ME305 Скачать руководство пользователя страница 64

You delete text by selecting the "<" from the character set with the   and   keys and then 
actuating the   key. All inputs to the right of the end of text character are then deleted.

Note
Scrolling through the characters

If the   and   keys are actuated continuously (finger continuously touching the glass panel), 
the characters are automatically scrolled.

Manuf. Ident. (menu 5.2)

The product-specific identification data can be read in the following submenus:

• Product type (menu 5.2.1)

• Serial number (menu 5.2.2)

• Software rev. (menu 5.2.3)

• Manuf. date (menu 5.2.4)

• Nominal size (menu 5.2.5)

Note
Nominal size

The nominal pipe size is entered in menu 5.2.5. It is only a piece of information and has no 
influence on the measured values. It is not possible to change the nominal size without the 
factory code.

HART address (menu 5.3)

True identification of the HART device (not used for PROFIBUS communication).

7.6

Service (menu 6)

This menu offers service and diagnostics parameters for maintenance purpose.

Note
Backlight settings (LCD lighting)

Off: Light turns off 10 minutes after last key action.

On: On for 1 hour after last key action.

Functions
7.6 Service (menu 6)

SITRANS FUS060 with PROFIBUS PA

64

Operating Instructions, 09/2021, A5E02225054-AD

Содержание 7ME305





























































































































Отзывы:

Нет отзывов