Siemens 7KM1020-0BA01-1DA0, Руководство пользователя, Страница: 45 / 94

PAC1020
Equipment Manual, 05/2020, L1V30610008B-01
43
Operation
6
6.1 Device interface
6.1.1 Displays and operator controls
The front of the power monitoring device contains the following display and control
elements.
① Display area:
Displays the current measured values, device settings and selection menus.
② Header area:
Specifies the information visible in the display area.
③ Footer area:
Specifies the functions assigned to the function keys.
④ Surfaces of the function keys:
The keys have multiple assignments. Function assignments and key labeling change according
to the context of operator input. The designation of the current key function can be seen above
the key number in the footer area of the display.
A short press on the key triggers the function once. Holding the key down for longer switches
on the autorepeat function after approximately 1 s. The function of the key is triggered repeat-
edly while the key is held down. Autorepeat is useful, for example, for fast incrementing of
values when parameterizing the device.
Figure 6-1 Device interface