s
________________________________________________________________________________
Siemens Energy & Automation, Inc. 3333 Old Milton Parkway Alpharetta, GA 30202
3
Class 72 Elevator Starter Set-up Guide
Congratulations, you have just purchased the most advanced, full-featured Elevator Starter
available. While this product contains several features to aid in set up, it is important to read and
understand this manual before attempting to install. As the set up and wiring of this version is
quite different from previous versions of Siemens Elevator Starters, it is equally important to
read even if you have a good working knowledge of the 72E version. If questions arise,
additional help is available by calling your local Siemens Sales Office. A list of these offices can
be found on our website at www.sea.siemens.com/sales.
Special Features:
16 Character by 2 Line Backlit Liquid Crystal Display:
Displays true RMS Currents for motor and line amps
Displays true RMS Voltages for the incoming line power.
Displays Fault Messages and Parameter settings.
Easy to use Keypad:
Set starter parameters
Scroll through Information and Fault Menus
Selectable Stall Prevention:
User selectable:
Dynamic
, based upon average start time;
Instantaneous
, senses stall
condition and reacts immediately; or
Time Based
.
Adjustable Current Limit:
Allows precise control during starting.
Table of Contents
Special Features: ........................................................................................................................... 3
Starter Selection ............................................................................................................................ 4
Features Overview:....................................................................................................................... 6
Control Power Connections:........................................................................................................ 7
Motor Connections: .................................................................................................................... 10
Inside Delta Motor Wiring......................................................................................................... 10
In Line Motor Wiring:................................................................................................................ 12
LCD Menu ................................................................................................................................... 13
Basic Configuration of Your Siemens Elevator Starter using The Parameter Menu .......... 15
Starter Reset ................................................................................................................................ 15
Electrical Specifications.............................................................................................................. 16
Maintenance and Troubleshooting............................................................................................ 18
IMPORTANT
These instructions do not purport to cover all details or variations in equipment, or to provide for every possible
contingency to be met in connection with installation, operation, or maintenance. Should further information be
desired or should particular problems arise which are not covered sufficiently for the purchaser’s purposes, the
matter should be referred to the local Siemens office. The contents of this manual shall not become part of or
modify any prior or existing agreement, commitment, or relationship. The warranty contained in the contract
between the parties is the sole warranty of Siemens Energy & Automation, Inc. Any statements contained herein
do not create new warranties or modify the existing warranty.
