manualshive.com logo in svg

Siemens 6MD662, Руководство пользователя

Поделиться
Скачать
Siemens 6MD662 Скачать руководство пользователя страница 5

Preview

5

SIPROTEC PROFIBUS DP - Bus mapping 6MD662/3/4
C53000-L1840-B011-03

QUALIFIED PERSONNEL

 

For the purpose of this manual and product labels, a qualified person is one who is 
familiar with the installation, construction and operation of the equipment and the 
hazards involved. In addition, he has the following qualifications:

•

Is trained and authorized to energize, de-energize, clear, ground and tag circuits 
and equipment in accordance with established safety practices.

•

Is trained in the proper care and use of protective equipment in accordance with 
established safety practices.

•

Is trained in rendering first aid.

Typographic and 
graphical conven-
tions 

The following text formats are used to identify concepts giving device information 
described by the text flow: 

Parameter names

, or identifiers for configuration or function parameters that appear 

in the device display or on the screen of a PC (with DIGSI) are shown in mono-script 
(same point size) bold text. This also applies to header bars for selection menus. 

Parameter conditions

, or possible settings of parameters that appear in the 

device display or on the screen of a PC (with DIGSI), are additionally shown in italic 
style. This also applies to selection items for selection menus.

„

Indications

“, or identifiers for information produced by the device or required by 

other devices or from the switchgear is shown in mono-script (same point size) and 
placed into quotation marks. 

For diagrams in which the identifier type results from the representation itself, text con-
ventions may differ from the above-mentioned. 

„

 

Warning! 

Hazardous voltages are present in this electrical equipment during operation. 
Non-observance of the safety rules can result in severe personal injury or property 
damage.

Only qualified personnel shall work on and around this equipment after becoming 
thoroughly familiar with all warnings and safety notices of this and the associated 
manuals as well as with the applicable safety regulations.

The successful and safe operation of this device is dependent on proper transport and 
storage, proper handling, installation, operation, and maintenance by qualified per-
sonnel under observance of all warnings and hints contained in this and the associat-
ed manuals.

In particular the general erection and safety regulations (e.g. IEC, EN, DIN, VDE, or 
other national and international standards) regarding the correct use of high-voltage 
installations must observed. Non-observance can result in death, personal injury or 
substantial property damage.

Содержание 6MD662























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды