manualshive.com logo in svg

Siemens 6GK5 124-0BA00-3AR3, Руководство по эксплуатации

Поделиться
Скачать
Siemens 6GK5 124-0BA00-3AR3 Скачать руководство пользователя страница 9

Safety notices

1

Read the safety notices

Note the following safety notices. These relate to the entire working life of the device.

You should also read the safety notices relating to handling in the individual sections, 
particularly in the sections "Installation" and "Connecting up".

CAUTION

To prevent injury, read the manual before use.

Safety notices on use in hazardous areas

General safety notices relating to protection against explosion

WARNING

EXPLOSION HAZARD

Do not open the device when the supply voltage is turned on.

Safety notices when using the device according to Hazardous Locations (HazLoc) and FM.
If you use the device under HazLoc or FM conditions you must also keep to the following safety 
notices in addition to the general safety notices for protection against explosion:

This equipment is suitable for use in Class I, Division 2, Groups A, B, C and D or non-hazardous 
locations only.

This equipment is suitable for use in Class I, Zone 2, Group IIC or non-hazardous locations only.

SCALANCE XR-100WG
Operating Instructions, 09/2020, C79000-G8976-C455-04

9

Содержание 6GK5 124-0BA00-3AR3































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды