manualshive.com logo in svg

Siemens 6GA7202-2AA10-1BF1, Руководство по эксплуатации, Страница: 151 / 168

Поделиться
Скачать
Siemens 6GA7202-2AA10-1BF1 Скачать руководство пользователя страница 151

Appendix

A

A.1

Service and Support

A.1.1

Technical Support

Siemens product support for SIMOCRANE    

The following addresses provide support for your SIMOCRANE products:

• Internet:

– You will find the latest information on SIMOCRANE products, product support, and FAQs 

on the Internet here (

https://support.industry.siemens.com/cs/ww/en/ps/20087

).

– You will find continuously updated information on Crane Application Notes on the 

Internet here (

https://support.industry.siemens.com/cs/ww/en/ps/20087/ae

).

• Support request on the Internet:

– Support request (

https://support.industry.siemens.com/cs/?lc=en-WW

)

• Hotline for Europe:

– Phone: +49(0)911 895 7 222

– Fax: +49 (0)911 895 7 223

– Email: Support Europe (

mailto:[email protected]

)

• Hotline for America:

– Phone: +1 423 262 5710

– Fax: +1 423 262 2231

– Email: Support America (

mailto:[email protected]

)

• Hotline for Asia/Pacific

– Phone: +86 10 6475 7575

– Fax: +86 10 6474 7474

– Email: Support Asia/Pacific (

mailto:[email protected]

) 

Siemens product support for SIMOTION and SINAMICS

The latest information about SIMOTION products, product support, and FAQs can be found on 
the Internet here (

http://support.automation.siemens.com/WW/view/en/10805436/130000

).

The latest information about SINAMICS products, product support, and FAQs can be found on 
the Internet here (

https://support.industry.siemens.com/cs/ww/en/ps/13229

).

SIMOCRANE CenSOR
Operating Instructions, 07/2021

149

Содержание 6GA7202-2AA10-1BF1









































































































































































Отзывы:

Нет отзывов