Technical specifications
7.8 Environmental conditions
Carrier controller
54
Operating Instructions, 09/2013, A5E03474162-02
Damping shock and vibration
If the device is subject to severe shock or vibration, you must take appropriate measures to
reduce the amplitude and/or acceleration. In such situations, use vibration damping or
vibration absorber systems.
7.8.3
Tests for compliance with environmental conditions
Tests for compliance with mechanical environmental conditions
The following table shows the type and scope of the tests of the device with regard to
mechanical environmental conditions.
Test
Physical variable
Value
Vibrations
IEC 60068-2-6:2007
Test Fc
Vibration
1 octave/min
10 cycles per axis
Frequency range
5 to 8.4 Hz
Deflection 3.5 mm
8.4 to 150 Hz
vibration acceleration 9.8 m/s
2
Shock
IEC 60068-2-27:2008
Test Ea
Shock form
Half-wave sine
Acceleration
15 g
Duration
11 ms
Number of shocks
3 per axis and direction
Tests related to climatic environmental conditions
The following table shows the type and scope of the tests of the device with regard to
climatic environmental conditions.
Environmental condition
Value
Comment
Operating temperature, device
rear side covered ≤ 15%
0 ... 45 °C
Relative humidity 95%, no
condensation
Operating temperature, device
rear side covered > 15%
0 ... 40 °C
Relative humidity 95%, no
condensation
