Siemens 6DL1131-6TH00-0PH1, Руководство по эксплуатации оборудования

Страница: 21 / 50

6.3 Parameter reassignment
Definition
Each configuration change resets the corresponding reaction. Changing the configuration of a
function does not affect other functions.
6.4 Explanation of the module/channel parameters
6.4.1 Diagnostics, Missing supply voltage L+
Definition
Enabling of the diagnostics for missing or insufficient supply voltage L+.
6.4.2 IO redundancy
Definition
You can configure two identical modules redundantly. To do so, plug both modules into a
redundant terminal block side by side. You can find additional information on mounting
modules in an IO redundancy configuration in the ET 200SP HA System Manual, section
"Installing", "Installing terminal block".
In IO redundancy mode, the left module is the master and the right module is the slave. The
HART communication takes place exclusively via one of the two redundant channels.
Description
Both redundant modules measure simultaneously and independently in the process. Both
redundant modules form diagnostics, interrupts and process values.
6.4.3 Diagnostics: short-circuit
Definition
This diagnostic message is enabled when a short-circuit occurs between the connection cables
of the encoder.
Parameters
6.4 Explanation of the module/channel parameters
DI 16xNAMUR HA
Equipment Manual, 08/2019, A5E39293880-AD
21