Siemens 3RW51 Series Скачать руководство пользователя страница 80

Страница: 80 / 192

Commissioning

6.2 Sealing the 3RW51 soft starter

3RW51 Soft Starter

Manual, 06/2019, A5E37108631002A/RS-AB/002

6.2

Sealing the 3RW51 soft starter

Requirements

●

Seal, sealing wire and a suitable sealing tool.

Procedure

●

Push the wire through the openings provided.

Result

By sealing the hinged cover, you protect the operator controls of the 3RW51 soft starter from

unauthorized access. It is nevertheless still possible to operate a 3RW5 HMI and

acknowledge messages.

Tip

The Local Interface and the memory module interface of the 3RW5 HMI High Feature can be

protected from unauthorized access by sealing the interface cover. Proceed in the same

sequence as for sealing the hinged cover.
For more information, see Chapter Design and operator controls of the 3RW5 HMI High

Feature. (Page 100)

Содержание 3RW51 Series

































































































































































































Результаты поиска

Содержание 3RW51 Series

Отзывы:

Siemens 3RW51 Series, Руководство пользователя, Страница: 80 / 192

Результаты поиска

Содержание 3RW51 Series

Отзывы: