Siemens 3RK1308-0 00-0CP0 Series, Руководство по эксплуатации оборудования

Страница: 192 / 218

Data sets
A.11 DS95 Read statistics
Motor starter (3RK1308‑0**00‑0CP0)
192
Equipment Manual, 11/2019, A5E34821005002A/RS-AC/003
A.11 DS95 Read statistics
Object
number
Byte.Bit Coding Meaning Range of
values
Increment
User data (technology data)
- 0 0 Reserved - -
- 1.0-5 0 Reserved - -
- 1.6-7 11
B
Bit 6 operating hours resolution
1 second
Bit 7 operating hours selection
1 operating hour - device 11 (fixed) 1
- 2 ... 3 0x00 Reserved - -
682 4 ... 7 Unsigned 32 Device operating hours in seconds 0 ... (2
32
-1) 1 s
603 8 ... 11 Unsigned 32 Number of motor CW starts 0 ... (2
32
-1) 1
604 12 ... 15 Unsigned 32 Number of starts motor CCW 0 ... (2 32 -1) 1
605 16 ... 17 Unsigned 16 Number of motor overload trips
Is incremented on tripping by:
• Blocking current monitoring
•
Overload protection
0 ... (2
16
-1) 1
- 18 ... 19 0x00 Reserved - -
609
1)
20 ... 23 Signed 32 Motor current I
max (rms)
±0 ... 20 000 0.01 A
608
2)
24 ... 27 Signed 32 Last tripping current I
A (rms)
±0 ... 20 000 0.01 A
602 28 ... 31 Unsigned 32 Motor operating hours in seconds 0 ... (2
32
-1) 1 s
615 32 ... 49 0x00 Reserved - -
616 50 ... 51 Unsigned 16 Number of switching element overload
trips
0 ... (2
16
-1) 1
2013 52 ... 53 Unsigned 16 Number of hard switching operations
of the relay
0 ... (2
16
-1) 1
- 54 ... 89 0x00 Reserved - -
1) The motor current I
max (rms)
shows the maximum valid rms value present in a phase over
the operating period (maximum pointer function). It is calculated every 100 ms.
2) The last tripping current I
A (rms)
is updated for each trip, irrespective of the magnitude of the
current that was present there beforehand (no maximum pointer function).
Note
Operating hours counter
The operating hours counter runs as soon as the motor starter is supplied with 24 V.