Siemens Nixdorf Fujitsu D1115, Дополнительное техническое руководство

Страница: 19 / 20

Installing drivers
A26361-D1115-Z180-5-7619
English - 11
Installing drivers
Insert the "Drivers & Utilities" CD.
If the CD doesn't start automatically call the START.EXE file in the main directory of the CD.
If the system board list is displayed select the system board or select under
Driver
the
operating system used and the audio and video drivers.
Upgrades
Main memory
Support: The system needs at least one module and can manage at most two SDRAM
modules.
PC100 modules must have an SPD-EEPROM*.
It is not possible to mix SDRAM and EDO modules.
Size: From 16 Mbytes up to 512 Mbytes SDRAM (Chipset 440 BX)
From 16 Mbytes up to 256 Mbytes SDRAM (Chipset 440 ZX)
Technology: 100 MHz unbuffered DIMM modules.
168 pin, 3.3V, 100 MHz SDRAM
2M, 4M, 8M, 16M and 32M x 64 bit
2M, 4M, 8M, 16M and 32M x 72 bit (with ECC)
Granularity: For one socket 16, 32, 64, 128 or 256 Mbyte (256 Mbyte only at chipset 440 BX)
*: The EEPROM of PC100 modules contains a number of critical timing parameters and data
regarding the chip and the module vendor. Due to this the mainboard will properly recognize
the module by reading all important timing parameters specified in the EEPROM via the Serial
Presence Detect interface.