Setting SCSI addresses (IDs)
Settings in SCSI Setup
A26361-D970-Z120-3-7619
61
Host Adapter BIOS
!
If the SCSI BIOS is disabled, the system cannot be booted from any of
the SCSI devices connected to the SCSI bus.
The SCSI BIOS can be disabled if the SCSI devices can only be operated with
additionally loaded drivers. This saves 16 Kbytes of system memory as well as
time during system startup.
If you disable the SCSI BIOS, you can still call the
SCSI-Setup
with the
CTRL
CTRL
CTRL
CTRL
-
A
A
A
A
keys during system startup and modify settings.
Enabled
The SCSI-BIOS is enabled (default setting).
Disabled
The SCSI BIOS is disabled.
i
Note that you will have to install additional drivers for your devices if the
SCSI BIOS is disabled.
Support Removable Disks under BIOS as Fixed Disks
This option allows you to use removable-media drives, such as MO drives, without
installing additional drivers.
Boot Only
Only the removable-media drive designated as the boot device is
treated as a hard disk (default setting).
All Disks
All removable-media drives supported by the BIOS are treated as
hard disk drives.
Disabled
No removable-media drives are treated as hard disk drives. In this
situation, software drivers are needed because the drives are not
controlled by the BIOS.
!
If a removable-media device is controlled by the SCSI controller BIOS,
do not remove the media while the drive is on.
Содержание D970
