Siemens Nixdorf D970, Техническое руководство

Страница: 54 / 120

Settings in BIOS Setup
Menu Server
44
A26361-D970-Z120-3-7619
VT100 Configuration
calls the submenu in which you make the settings for operating a VT100-
compatible terminal on the system. The terminal can be connected to the server
system via a direct serial connection (cable) or a dialup connection (modem).
Screen outputs are directed in parallel to the terminal and the system monitor.
Keyboard input at the terminal is likewise sent to the system and treated like input
at the attached server keyboard. The BIOS setup of the system, for example, can
be called up and modified at the terminal.
With a modem connection, further settings must be made for VT100 functionality
either via an operating system server management process or with the
SCU
. The
telephone number of the pager server, the subscriber number and the modem
initialization sequences can also be entered there.
!
It is not possible to enter a system password in
Keyboard Mode
at the
VT100 terminal.
PhoenixBIOS Setup
Server
VT100 Configuration Item Specific Help
VT100: [Disabled]
VT100 Mode: [Standard]
VT100 Interface Addr.: 3F8h
VT100 Interface IRQ: IRQ 4
Connection: Direct
Baud Rate: 9600
Com. Setting: 8/1, No Parity
F1 Help
↑↓
Select Item -/+ Change Values F9 Setup Defaults
ESC Exit
← →
Select Menu Enter Select
Ê
Sub-Menu F7 Previous Values
Example for submenu
VT100 Configuration
VT100 - VT 100 operating mode
enables or disables VT100 operating mode.
Enabled
VT100 operating mode is enabled.
Disabled
VT100 operating mode is disabled (default entry).