Power - power-management features
Settings in BIOS Setup
A26361-D969-Z120-8-7619
41
Hard Disk Timeout
Requirement: The
Power Management Mode
must be set to
Customize
.
This field defines the amount of time without system activity before the motor of the
hard disk drive is switched off. As soon as there is a hard disk access, the motor is
switched back on.
2 min
,
5 min
,
10 min
,
15 min
Default entry =
10 min.
Disabled
The PC does not switch off the hard disk drive.
Standby CPU Speed
Requirement: The
Power Management Mode
must be set to
Customize
.
This field specifies the processor's clock speed in standby mode. The entries
High
,
Medium
and
Low
cause programs to run more slowly.
In a network environment the processor's clock speed must be set to
Max
,
otherwise data transfer will take place at reduced speed.
Max
Maximum clock speed
High
1/4 of maximum clock speed
Medium
1/8 of maximum clock speed (default entry )
Low
1/16 of maximum clock speed
Save To Disk
Requirement: The
Power Management Mode
must be set to
Customize
. There must
be sufficient storage space on the hard disk.
This field specifies whether the current system status (active programs, files,
memory contents) is saved to file
SAVETO.DSK
when the system switches to
suspend mode. This system status is restored when you restart the system; in
other words, you can carry on working in the same application.
Enabled
The contents of the main memory, working memory, video memory
and cache are saved to the hard disk.
Disabled
The memory contents are not saved (default entry).
