Siemens Nixdorf D969 Скачать руководство пользователя

Страница: 25 / 92

Main

- system functions

Settings in BIOS Setup

A26361-D969-Z120-8-7619

POST Error Halt - Aborting system startup

defines whether the system startup is to be aborted and the system halted when
an error is detected.

Halt On All Errors

If the self-test detects an error, system startup is aborted after the
self-test, and the system is halted (default entry).

No Halt On Any Errors

The system startup is not aborted. The error is ignored as far as
possible. The error is ignored as far as possible.

Quick Boot

can reduce the extent of the self-test and thus accelerate the system startup.

Enabled

When the PC is switched on, the quick self-test is carried out, in
which the floppy disk drives are not checked.

Disabled

When the PC is switched on, the complete PC configuration is
tested (default entry).

Quiet Boot

Instead of a start information a logo is displayed on the screen.

Enabled

The logo is displayed on the screen. A switch to the start
information is made if you press the

[Esc]

key or if errors occur.

Disabled

The start information is displayed on the screen (default entry).

Содержание D969





























































































Результаты поиска

Содержание D969

Отзывы:

Похожие инструкции для D969

Бренды по названию

Популярные бренды

Siemens Nixdorf D969, Техническое руководство

Результаты поиска

Содержание D969

Отзывы:

Похожие инструкции для D969

Бренды по названию

Популярные бренды