Settings with switches
A26361-D1025-Z120-7-7419
English - 13
Clock speed - switch 1, 2, 3 and 4
!
The switches may only be set as specified in the table below for the particular processor
used.
Processor
switch 1
switch 2
switch 3
switch 4
166 MHz
on
off
on
on
200 MHz
on
off
off
on
233 MHz
on
off
off
off
Reserved
off
off
off
off
Recovering System BIOS - switch 5
Switch 5 enables recovery of the old system BIOS after an attempt to update has failed. Memory
bank 1 must be populated in order to be able to restore the system BIOS. To restore the old BIOS
you need a Flash BIOS Diskette (call customer service).
on
The System BIOS executes from floppy drive A: and restores the System BIOS on
the system board.
off
The System BIOS is started from the system board (default setting).
Write protection for floppy disk drive - switch 8
Switch 8 is used to define whether floppy disks can be written or deleted in the floppy disk drive. To
write and delete floppy disks, the write protection in
BIOS setup
must be disabled (in menu
Security
,
the field
Diskette Write
must be set to
Enabled
).
on
The floppy disk drive is write-protected.
off
Read, write and delete floppy disks is possible (default setting).
