Siemens Healthcare XPRECIA STRIDE Скачать руководство пользователя страница 56

Страница: 56 / 59

102

103

Xprecia Stride

User Guide

Appendix E: Glossary

RECALL

Accesses data, such as test results, stored on Stride.

RECALL RESULTS ICON

Displays previous patient test and QC test results.

RESULT NUMBER

A unique number Stride assigns to a patient test result or
a QC test result.

SAMPLE

A single aliquot of a patient or control specimen used for
testing.

SCREEN

The display area that contains the controls you select
when operating the system. The system software
UI contains screens, prompts, messages, and other
operating information.

SETTINGS

The areas of the software UI where you can adjust or
configure Stride.

SETTINGS ICON

Displays the system settings.

SOFTWARE

Computer instructions that generate and carry out
commands to control the system operation.

SYSTEM MESSAGES

An informational message (warning or error) that requires
corrective action to continue operating Stride.

TEST

Analysis of a patient sample or a control solution.

TEST RESULT

Measured reportable values displayed at the end of a test
sequence.

TEST RESULTS

Specifies the unit of measure for test results displayed for
patient samples and QC samples.

TEST SEQUENCE

A series of software UI screens that guide you through the
tasks required to perform a test on a sample.

TROUBLESHOOTING

Determining the cause of a system or test
performance problem.

TUTORIAL

An on-screen tutorial that walks you through the
processes for performing a patient test and a QC test.

USER INTERFACE

The system software screens where you interact.
Abbreviation: UI.

VOLUME

Adjusts the volume of the system speaker, which alerts
you to error messages and successful scans.

Stride acronyms

INR

International Normalized Ratio

OID

Operator ID

PID

Patient ID

Quality Control

User Interface

Содержание XPRECIA STRIDE




























































Результаты поиска

Содержание XPRECIA STRIDE

Отзывы:

Siemens Healthcare XPRECIA STRIDE, Руководство пользователя, Страница: 56 / 59

Результаты поиска

Содержание XPRECIA STRIDE

Отзывы: