Siemens Healthcare XPRECIA STRIDE, Руководство пользователя, Страница: 33 / 59

56 57
Xprecia Stride User Guide 4. Changing the settings
Changing the administrator settings
You can change the settings for Patient ID (PID), and Login,
and you can also add or remove an Operator ID (OID).
For example, you can set the device to require a password
or allow an operator to perform a test without entering a
Patient ID (PID).
Tip To view the next screen of settings, tap .
IMPORTANT
When connected, Xprecia DMS overwrites any Stride user
settings and updates the Operator ID (OID) list with the
latest updates from DMS to Stride.
Adding a Patient ID (PID)
INSTRUCTIONS
1. Tap .
2. Tap .
3. Tap .
4. Tap Patient Test to allow Patient ID (PID) scanning
for patient tests.
5. Tap STAT Test to allow an operator to skip
Patient ID (PID) scanning for patient tests.
6. Tap to choose the Entry Type:
‒ for barcode reader
‒ for keypad
7. Tap Minimum.
8. Tap or to enter the minimum number of
characters for the PID.
9. Tap Maximum.
10. Tap or to enter the maximum number of
characters for the PID.
11. To accept your changes and return to the previous
screen, tap .
Adding an Operator ID (OID) Login
INSTRUCTIONS
1. Tap .
2. Tap .
3. Tap .
4. Tap Enable to require a password to use the device.
5. Tap Validate to compare the password against a list of
valid passwords stored on Stride.
6. Tap to choose the Entry Type:
‒ for barcode reader
‒ for keypad
7. Tap Minimum.
8. Tap or to enter the minimum number of
characters for the login.
9. Tap Maximum.
10. Tap or to enter the maximum number of
characters for the login.
11. To accept your changes and return to the previous
screen, tap .
Adding an Operator ID (OID)
INSTRUCTIONS
1. Tap .
2. Tap .
3. Tap .
4. Scan or enter the OID.
5. Tap to confirm or to cancel.
Removing an Operator ID (OID)
INSTRUCTIONS
1. Tap .
2. Tap .
3. Tap .
4. Scan or enter the OID.
5. Tap to confirm or to cancel.