Siemens Healthcare XPRECIA STRIDE Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 59

Siemens Healthcare XPRECIA STRIDE Скачать руководство пользователя страница 24

38

39

Xprecia Stride

User Guide

2. Performing a patient test

Fingerstick sample collection method

Use the following instructions to obtain a fingerstick
patient blood sample.

Requirement

Only use auto-disabling, single-use

lancing devices with Stride.

Collecting a fingerstick blood sample

INSTRUCTIONS

1. To stick the finger, firmly place the lancet against the

finger and press the lancet trigger.

2. Gently squeeze from the base of the finger to form a

round drop of blood. If the blood smears or runs, wipe
it off with a tissue and gently squeeze another round
drop of blood.

Requirement

The drop of blood should be about the

same size as the test strip target area (a minimum
of 6 μL in volume). Low sample volume will cause
an error message.

3. Return to page 36 to follow steps 12–16.

IMPORTANT

Apply the drop of blood to the test strip target area within
15 seconds of lancing the fingertip.

Viewing patient test results

After you perform a patient test, the results display.

INR

10:00 am

PT

10.05.2015

1.2

@

9:58 am

10.05.2015
Outpatient 12K9

Operator 2980W

The following information appears on the screen: INR value,

time and date, Patient ID (PID), and Operator ID (OID) (if entered).

Understanding results

Results display in the International Normalized Ratio (INR).
Because desired ratios may vary depending upon the
clinical practice and test methodologies, the optimum
therapeutic range for this method should be established by
each user.

Each lot of Xprecia System PT/INR test strips is calibrated
to a reference lot of human recombinant thromboplastin
traceable to the World Health Organization International
Reference Preparation.

1

INR =

(

[Patient Prothrombin Time (sec)]

)

ISI

[Mean Normal Prothrombin Time (sec)]

The calculation is performed with an ISI of 1.0 and a typical
Mean Normal Prothrombin Time of 12.0 seconds.

1. WHO Expert Committee on Biological Standardization. Forty-eighth Report. Geneva,

World Health Organization, 1999 (WHO Technical Report Series, No. 889)

«
...
22
23
24
25
26
...
»

Содержание XPRECIA STRIDE




























































Отзывы:

Нет отзывов