Siegenia KFV BS 6000, Руководство по сборке

Страница: 33 / 64

H39.MFVRS009EN-00 02.2019 33 / 64
Assembly instructions Multi-point locks, key operated
BS 6000 OF/OR, BS 6000, BS 6600
5.2 Swing door roller latch
5.2.1 Replace soft lock latch with swing door roller latch (optional)
1 2
1 x 5.5 mm
There is a slot [1] on the gear box
side. The locking spring [2] of the
latch shank can be opened through
this slot using a slotted screwdriver.
1 X 5.5
f
Carefully press on the locking
spring of the latch shank th-
rough the opening using the
slotted screwdriver.
The latch shank will be released.
f
Remove the latch and replace it
with the swing door roller latch.
CLICK!
f
Carefully press the swing door
roller latch into the gear box un-
til the latch shank snaps into the
locking spring and then release
the latch.
The swing door roller latch must
be able to extend independently
and be held securely by the locking
spring.
f
Check that the swing door roller
latch is properly seated and mo-
ves with ease. Press the swing
door roller latch several times
(approx. 5x) into the gear box
and release the latch again.
The swing door roller latch must
move with ease and extend again
independently.