manualshive.com logo in svg

Siegenia DRIVE axxent DK, Руководство по сборке и эксплуатации

Поделиться
Скачать
Siegenia DRIVE axxent DK Скачать руководство пользователя страница 4

4

DRIVE axxent DK 

Assembly and operating instructions

03.2021

1. About this documentation

1.1 Target group

•  This documentation is intended for use by specialists and end users.
•  All instructions in this document pertaining to assembly, installation, maintenance and trouble-shooting are to be 

performed exclusively by experienced professionals with training and experience in the installation, commissioning and 
maintenance of motor drives.

•  All instructions contained in this document pertaining to operation and cleaning are intended for end users.
•  Following installation, the installation company must hand over the assembly and operating instructions to the end user 

and brief the user/owner of the building accordingly.

2. Safety

2.1 Intended use

•  DRIVE axxent DK is a concealed tilt sash locking drive, which may only be used for the motorised locking/release, tilting 

and closing of a tilt sash or turn and tilt window.

•  The drive can be controlled via a wall button, via a smartphone/tablet or optionally via radio remote control.
•  DRIVE axxent DK is an incomplete machine that must not be commissioned until it has been incorporated in a power-

operated window as a complete machine and has been approved in accordance with the manufacturer's specifications. 
Carry out a risk assessment in accordance with the Machinery Directive.

•  DRIVE axxent DK meets, due to its slow running speed of ≤ 5 mm/s, the requirements of DIN EN 60335-2-103 and of 

the VFF Bulletin „Power operated windows“ (KB-01). According to VFF Bulletin (KB-01), the drive attains the protection 
classes 0 to 3 without additional  safety devices.

•  DRIVE axxent DK is exclusively intended for installation in vertical tilt/turn-and-tilt windows made of timber, PVC or 

aluminium in fixed buildings. The device must be installed in the window frame at the top of the locking side.

•  Requirements for timber profiles:

-  groove axis 13 mm
-  airgap 12+1 mm and eurogroove min. 30 mm

•  Requirements for PVC profiles:

-  groove axis 13 mm
-  airgap 12+1 mm

•  Requirements for aluminium profiles:

-  groove axis 10 mm
-  ALU eurogroove and chamber dimension 21 +1 mm

Содержание DRIVE axxent DK

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды