Installation and operating instructions
AEROMAT 100
03.2020
5
Unit function
Pressure differential operation
• The room is ventilated as the indoor and outdoor air pressures are equalised (pressure differential). As this happens, the
air normally flows from outside into the room.
• The air flow into the room varies as the wind pressure changes with the weather.
Unit types
Depending on its version, the AEROMAT 100 is delivered with a left or right-hand operating lever. On the respective
opposite side, there is a small screw for the pressure setting of the fan flap.
Use/Unit properties
Type D
Type DK
1
3
2
Pressure setting of the fan flap
(Item
1
)
Fan flap
(Item
2
)
The airflow is regulated using the operating lever.
-
Electric fan flap
(Item
2
)
The airflow is regulated via an external switch.
(for possible switch types, see the "Accessories" chapter).
-
Operating lever
(Item
3
)
The airflow can be continuously set using the operating lever.
Attention! Units with electric fan flaps cannot be operated manually via the
operating lever.
( )
Pressure differential operation
The room is ventilated as the indoor and outdoor air pressures are equalised.
Normally, air flows from outside into the room.
Depending on the weather conditions, the wind pressure increases the air flow
into the room.
Volume flow limiter
(optional accessories)
For limiting the air flow at changing and high differential pressure.
Rod operating device
(optional accessories)
We recommend to use the rod operating device starting at an installation
height of 1.80 m or higher (see the "Rod operating device" and "Accessories"
chapters). Do not use any inappropriate auxiliary materials to operate the unit.
-
Sound absorption against external noise
Weather grille protects against direct snow and rainfall
Aluminium casing anodised or powder-coated, PVC face plates
Thermal separation (low heat transfer via the casing)
Содержание AERO
Страница 11: ......
