Siegenia AERO AEROMAT VT WRG 1000 smart, Оригинальная инструкция по эксплуатации

Страница: 17 / 24

H47.FENS037EN-03 03.2021 17/24
Original operating instructions
AEROMAT VT WRG 1000
AERO
13 Maintenance
WARNING
Electrically.operated.unit
Risk of fatal injury from electric shock or fire
• Pull.the.mains.plug.out.of.the.socket.prior.to.every.
cleaning.process.or.maintenance.work..Never.pull.at.
the.cable.to.disconnect.the.device.from.the.electricity.
grid.
• For.all.devices.with.a.fixed.connection.to.the.230.V.AC.
mains.power.supply,.switch.off.all.poles.of.the.feeder.
13.1 Cleaning
When.cleaning.the. AEROMAT VT WRG 1000 ,.do.not.
allow.any.liquid.to.get.inside.the.unit.
• Never.use.cleaning.agents.that.are.aggressive.or.
contain.solvents,.or.sharp-edged.objects,.as.these.
may.damage.the.surfaces.of.the.casing.
• Never.clean.the.unit.with.a.high-pressure.cleaner.or.
steam-jet.cleaner.
• Clean.the. AEROMAT VT WRG 1000 .with.a.cloth.
moistened.with.a.mild.soap.solution.or.cleaning.
agent.
13.2 Maintenance intervals
Changing the filter
Replace.filter.every.12.months.or.when.the.filter.
change.indicator.lights.up.
Filters.must.be.replaced,.not.cleaned..Only.use.
genuine.filters.from. SIEGENIA ..You.can.purchase.
replacement.filters.from. SIEGENIA or from
specialist.retailers.
Cleaning the air passages and heat exchanger
Check.and.clean.air.passages.and.heat.exchanger.every.
12.months.
Condensation.does.not.generally.develop..If.the.
surface.of.the.heat.exchanger.becomes.wet.for.a.
short.period,.as.can.happen.in.damp.locations,.for.
example,.the.moisture.will.dissipate.quickly.with.
the.outgoing.air.
13.3 Removing the front panel
The.figure.below.shows.the.opening.direction.for.a.
AEROMAT VT WRG 1000 .that.has.been.installed.
horizontally.
1.
1. Open.the.locking.bolt.
2.
3.
4.
2. Pull.out.the.front.panel.
3. Slide.the.membrane.key.out.sideways.(if.present).
4. Remove.the.front.profile.and.place.it.on.a.soft.
surface.(cardboard,.sheet).