4
AEROMAT 80
Assembly and operating instructions
08.2021
Target group of this documentation
This documentation is addressed exclusively to specialist companies. All work described in this document is to be performed
exclusively by experienced professionals with training and practice in the assembly, installation and maintenance of
ventilation units. Safe and proper assembly of this unit is not possible without expert knowledge.
Intended use
• The AEROMAT 80 is intended for installation in the exterior windows/walls of permanent structures in accordance with
our installation and design documents as well as the specifications of our assembly instructions and is only suitable for the
ventilation of enclosed rooms.
• Do not use the AEROMAT 80 in environments with corrosive or explosive atmospheres (dust, vapour or gas).
• Use the AEROMAT 80 only with genuine accessories from SIEGENIA.
• Comply with the safety regulations for operating electrical equipment and, if necessary, for ladders, steps and work
overhead or at certain heights.
• Use the AEROMAT 80 only when it is in a technically sound condition.
• Do not modify the unit's components in any way.
• Ventilation openings must be kept free and must not be blocked by other equipment, furniture or objects.
• Please do not put any objects on top of the unit.
• In the event of a fault, only have the AEROMAT 80 repaired by experienced specialists with training and practice in the
maintenance of ventilation units.
• Any use of this product that is not in accordance with its correct use, or any adaptation of or modification to the product
and its associated components for which the express consent of SIEGENIA has not been obtained, is strictly prohibited.
SIEGENIA accepts no liability whatsoever for any material losses or injury to people caused by failure to comply with this
stipulation.
