Siegenia-AUBI KFV EE166EE930 Series, Руководство по сборке

Страница: 4 / 28

2 Last update: 30.8.2011
Emergency Exit and Panic Door Locks Assembly Instructions
Target Group of this Documentation
This documentation is intended to by used by specialists only. All work described in this document is to be
performed by experienced professionals with training and practice in the assembly, installation and mainte-
nance of emergency exit and panic door locks in the corresponding doors. Safe and proper assembly of
these locks is not possible without expert knowledge.
Correct Use
Installation location
• The lock may only be installed in vertically plumb emergency exit or panic doors in stationary buildings.
The following door dimensions must be observed together with the matching lock size:
Door height and width
Handle height Min. door
height
Max. door
height
Max. door
width
1,020 mm 2,009 mm 2,490 mm 1,320 mm
1,050 mm 2,039 mm 2,520 mm 1,320 mm
Door weight (for classification index, see label on lock case)
Classification index Class Door weight
3rd digit 5 max. 100 kg
3rd digit 6 max. 200 kg
• The lock may only be installed in doors that have been assembled in a technically sound manner. Door seals
and warping must not result in excessive operating values that would impede the escape function of the lock.
• The door design must permit use of the lock. It is therefore mandatory that you check the following:
- when used in a fire rated or smoke rated door, the lock is suitable for the door according to its certification.
- for double-leaf panic doors with a door closer, especially fire rated and smoke rated doors, a closing
sequence regulator according to EN 1158 and a catch flap are installed to ensure the correct closing
sequence.
- for double-leaf panic doors with a rebated central joint and escape door locks fitted on both leafs, it must be
possible to open either leaf with its own lock and to open both leafs when both locks are operated together.
• Most emergency exits and panic doors are installed on the building exterior and open outwards; there are
few exceptions. Ensure construction measures such as erecting a canopy that the lock is not permanently
exposed to the weather so that the function of the lock is not impaired.
• The lock must not be installed:
- in doors made of Accoya
- in swing doors
- in doors of rooms or buildings with an aggressive atmosphere
- in doors of rooms/buildings directly on the coast