SIEB & MEYER sinudyn-0360520 Series, Описание аппаратуры

Страница: 50 / 95

:
Functional Description of the Connectors/Interfaces
sinudyn-36 Hardware Description 0360520xx 49
8.3 Error Messages
Errors are indicated by the red LEDs FC0 , FC1 , FC2 and FC3 . If the LED is
X flashing
-
the respective error has caused the turnoff of the drive.
X continuously on
-
an error message is indicated without causing a reaction.
An error causing the turnoff of the drive is reset by a positive edge at the input Con-
troller ON . The error message for the deactivated controller must not be acknowl-
edged.
An error code is allocated to every error message. Always the error with the highest
error code is evaluated and displayed.
%
LED is off
&
LED flashes
2
LED is on:
Error Designation Reaction
Message Number
EE
EF EE
ED
F01 mains supply not OK The drive decelerates with the parameter Emergency Ramp
and is then deactivated.
FR
E
EE DE
EE
F02 motor temperature (NTC /
PTC) The drive decelerates 100 ms and is then deactivated.
EF
EE ED
EE
F03 heat sink temperature The drive decelerates 100 ms and is then deactivated.
FE
FE DE
DE
F05
I
2
t monitoring
The drive decelerates 100 ms and is then deactivated.
FE
EF DE
E\D
F06 overspeed The drive is deactivated immediately.
EF
EF ED
ED
F07 error of the motor measuring
system The drive is deactivated immediately.
EF
FE ED
DE
F09 motor phases not OK The drive is deactivated immediately.
EE
YYF
F EE
DD
F11 undervoltage DC_LINK The drive is deactivated immediately.
FF
EE DD
EE
F12 overvoltage DC_LINK The drive is deactivated immediately.
FF
EF DD
ED
F13 overload current output stage The drive is deactivated immediately.
FE
FF DE
DD
F14 power supply unit is not OK the drive cannot be activated.
FF
FF DD
DD
F15 parameterizing error the drive cannot be activated.
FF
FE OM
F26 error of the restart lock