6
Connectors, Switches and
Displays
Fig. 5: Connectors, switches and displays on the gateway 0362151
Note
7-segment display:
▸
Device version 0.000: The 7-segment display has no function. Therefore, it remains
blank.
▸
Device version 1.000 and higher: The 7-segment display shows status and error
messages of the gateway.
6.1
Address Selection Switch for PROFIBUS
slave
The gateway provides two switches on the front
panel for addressing purposes. These can be used
to select the PROFIBUS slave address.
Note
Use the common address settings for PROFIBUS, i.e. slave addresses always start with
ID = 3, because smaller address areas are reserved for master devices. The default ad-
dress of the device when delivered is “3”.
19
Gateway 0362151 - PROFIBUS to SERVOLINK 4 Connection
Connectors, Switches and Displays
