14
Functions of the Terminal
14.1
MAIN MENU
Press the ESC key to switch to the MAIN MENU and to display the top menu level.
Via the “Cursor up” und “Cursor down” keys, you can display the different menu
items of one menu level.
Via the ENTER key you confirm the selected menu item and can change to the next
menu level.
Via the ESC key, you can switch back to the previous menu level.When the lowest
menu level has been reached, the corresponding mode or the parameter input is dis-
played. By default, automatic operation is displayed.
14.2
AUTOMATIC MODE
14.2.1
Actual Value Display
The actual value displays are different between operating terminals with and without
USB support.
14.2.1.1
Actual Value Display of Devices with USB Support
In automatic operation, current drive values are displayed. They include the actual pa-
rameter set number, the actual device status and the error, warning or quick stop code
number. Usually, the display additionally shows the actual speed (object 168) and the
actual current (object 102).
The displayed unit of the current depends on the DeviceDriveFunctionMode: For “Ser-
vo” and “HSBLOCK”, the current is displayed as sine wave peak amplitude (A), for
“HSPWM”, “HSPAM” und “U/f” as RMS value (Arms). (The DeviceDriveFunctionMode
“HSPWM” is supported for software version (operating terminal) 3.11 and higher and “U/
f” for version 3.12 and higher.)
Examples
25
Drive System SD2x - Operating Terminal 0362150 and 0362153
Functions of the Terminal
