SICK WL12G-3P3572S12, Руководство по эксплуатации

Страница: 17 / 111

4 Operating elements and status indicators
2 3
6
2
LED yellow: status of received light beam
3
LED green: supply voltage active, teach-in mode I
Blue LED: supply voltage active, teach-in mode II
LED light blue: supply voltage active, teach-in mode III
6
Teach-in button
Function 1: teach-in sensitivity on reflector
Function 2: operation/teach-in mode changeover
5 Mounting
Mount the sensor and the reflector using suitable mounting brackets (see the SICK
range of accessories). Align the sensor and reflector with each other.
6 Electrical installation
The sensors must be connected in a voltage-free state. The following information must
be observed, depending on the connection type:
– Male connector connection: pin assignment
Only apply voltage and switch on the voltage supply once all electrical connections have
been established.
Explanation of the connection terminology used in the following tables:
BN = brown
WH = white
BU = blue
BK = black
Q = switching output
L+ = supply voltage (U
V
)
M = weight
DC: 10 ... 30 V DC, see „Technical data“
Table 4: Pin assignment
PIN Pin assignment
1 = BN + (L+)
OPERATING ELEMENTS AND STATUS INDICATORS
4
8027339/1D6C/2021-11-19 | SICK O P E R A T I N G I N S T R U C T I O N S | WL12G-3P3572S12 17
Subject to change without notice
en