Chapter
2
Operating Instructions
V200/V300
8
© SICK AG • Industrial Safety Systems • Germany • All rights reserved
8012227/YT87/2016-03-29
Subject to change without notice
On safety
2
On safety
This chapter deals with your own safety and the safety of the equipment operators.
⋅
Please read this chapter carefully before working with the V200/V300 or with the
machine protected by the V200/V300.
2.1
Qualified safety personnel
The V200/V300 safety camera system must only be installed, commissioned and serviced
by qualified safety personnel. Qualified safety personnel are defined as persons who
•
due to their specialist training and experience have adequate knowledge of the power-
driven equipment to be checked
and
•
have been instructed by the responsible machine owner in the operation of the machine
and the current valid safety guidelines
and
•
are sufficiently familiar with the applicable official health and work safety regulations,
directives and generally recognized engineering practice (e.g. DIN standards, VDE
stipulations, engineering regulations from other EU member states) that they can
assess the work safety aspects of the power-driven equipment
and
•
have access to these operating instructions and have read them.
As a rule these are qualified safety personnel from the ESPE manufacturer or also persons
who have been appropriately trained at the ESPE manufacturer, are primarily involved in
checking ESPE and are allocated the task by the organisation operating the ESPE.
