manualshive.com logo in svg

SICK TR110 Lock, Руководство по эксплуатации

Поделиться
Скачать
SICK TR110 Lock Скачать руководство пользователя страница 42

9

Troubleshooting

9.1

Safety

DANGER

Hazard due to lack of effectiveness of the protective device
Persons and parts of the body to be protected may not be recognized in case of non-
observance.

b

Immediately shut the machine down if the behavior of the machine cannot be
clearly identified.

b

Immediately put the machine out of operation if you cannot clearly identify or allo‐
cate the fault and if you cannot safely remedy the fault.

b

Secure the machine so that it cannot switch on unintentionally.

DANGER

Hazard due to unexpected starting of the machine

b

When any work is taking place, use the protective device to secure the machine or
to ensure that the machine is not switched on unintentionally.

DANGER

Hazard due to lack of effectiveness of the protective device
Persons and parts of the body to be protected may not be recognized in case of non-
observance.

b

Do not do repair work on device components.

b

Do not make changes to or manipulate device components.

b

Apart from the procedures described in this document, the device components
must not be opened.

NOTE

Additional information on troubleshooting can be found at the responsible SICK sub‐
sidiary.

9.2

System status

Important information

NOTE

Displays other than those described here indicate an internal device fault. In this case, please contact your respon‐
sible SICK subsidiary.

Status indicators

Table 14: Status indicators

Outputs

LED indicators

Status

Door

OSSDs AUX

LOCK

AUX
DOOR

AUX
DIA

STATE

DIA

LOCK

Self-test

X

OFF

OFF

OFF

OFF

Ö

5 Hz

10 s

o

o

Self-test after switch-on

9 

TROUBLESHOOTING

42

O P E R A T I N G   I N S T R U C T I O N S | TR110 Lock

8023119/15LY/2019-10-28 | SICK

Subject to change without notice

Содержание TR110 Lock





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды