manualshive.com logo in svg

SICK TR110 Lock, Руководство по эксплуатации

Поделиться
Скачать
SICK TR110 Lock Скачать руководство пользователя страница 25

5.3

Mounting the safety switch

Important information

NOTICE

The actuator must not be used for guiding or used as a stop.

Prerequisites

•

To mount on the machine, the safety switch and actuator must be put together.

•

A clearance of 12 mm must be maintained around the actuating head.

Approach

The safety locking device may be in any installation position.

b

Mount the safety switch using 4 × M5 screws.

b

Observe the maximum tightening torque of 1.4 Nm.

Figure 18: Mounting the safety switch

1

Mounting holes

2

12 mm clearance for actuator

Complementary information

Mounting brackets are available for the actuator and safety locking device as acces‐
sories (

see "Dimensional drawings of the mounting bracket", page 60

).

5.4

Mounting straight and angled actuators

Important information

NOTICE

The actuator must not be used for guiding or used as a stop.

MOUNTING 

5

8023119/15LY/2019-10-28 | SICK

O P E R A T I N G   I N S T R U C T I O N S | TR110 Lock

25

Subject to change without notice

Содержание TR110 Lock





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды