manualshive.com logo in svg

SICK TR110 Lock, Руководство по эксплуатации

Поделиться
Скачать
SICK TR110 Lock Скачать руководство пользователя страница 24

5

Mounting

5.1

Safety

DANGER

Hazard due to unexpected starting of the machine
Death or severe injury

b

Make sure that the dangerous state of the machine is and remains switched off.

NOTICE

If incorrectly installed or if the ambient conditions are not suitable, the safety locking
device can be damaged.

b

Arrange the safety switch and actuator so that damage due to unintentional out‐
side influences is prevented.

b

Do not use a safety switch and actuator as a stop.

b

The set-up and mounting of the safety switch and actuator must be stable enough
to maintain proper operation.

b

Use only reliable mounting elements that can only be removed with tools.

b

If an opening is created in the physical guard due to alignment errors, it must not
impair the protective function.

5.2

Changing the actuation direction

Overview

The safety locking device can be actuated from three directions (A, B and C). The actua‐
tion direction only needs to be changed if the safety locking device is to be actuated
from behind (D).

 C

B

D

A

Figure 17: Changing the direction of approach

Approach

1.

Loosen the screws on the actuating head.

2.

Turn the actuating head in the desired direction.

3.

Tighten the screws to 1.2 Nm.

5 

MOUNTING

24

O P E R A T I N G   I N S T R U C T I O N S | TR110 Lock

8023119/15LY/2019-10-28 | SICK

Subject to change without notice

Содержание TR110 Lock





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды