8
Maintenance
8.1
Cleaning
NOTICE
Equipment damage due to improper cleaning.
Improper cleaning may result in equipment damage.
■
Only use recommended cleaning agents and tools.
■
Never use sharp objects for cleaning.
b
Clean the optics cover at regular intervals and in the event of contamination with
a lint-free lens cloth (part number 4003353) and plastic cleaning agent (part
number 5600006). Rinse off coarse dirt first with water. The cleaning interval
essentially depends on the ambient conditions.
8.2
Maintenance plan
The product does not require regular maintenance.
Depending on the assignment location, the following preventive maintenance tasks
may be required for the device at regular intervals:
Table 5: Maintenance plan
Maintenance work
Interval
To be carried out
by
Check device and connecting cables
for damage at regular intervals.
Depends on ambient conditions and
climate.
Specialist
Clean housing and optics cover.
Depends on ambient conditions and
climate.
Specialist
Check the screw connections and
plug connectors.
Depends on the place of use, ambi‐
ent conditions or operating require‐
ments. Recommended: At least every
6 months.
Specialist
Check that all unused connections
are sealed with protective caps.
Depends on ambient conditions and
climate. Recommended: At least
every 6 months.
Specialist
8
MAINTENANCE
28
O P E R A T I N G I N S T R U C T I O N S | TiM1xx
8020631/1DWW/2022-08 | SICK
Subject to change without notice
