Operating instructions Register sensors RS25
Safety
12
© SICK AG • Presence Detection • Subject to change without notice • 8015887
2.3
Modifications and conversions
Modifications and conversions to the register sensor and/or the installation
may result in unforeseeable dangers.
Technical modifications and expansions made to the register sensor
require the prior written approval of the manufacturer.
2.4
Requirements for skilled persons and operating personnel
WARNING
Risk of injury due to insufficient training.
Improper handling may result in considerable personal
injury and material damage.
For this reason:
• All activities should only ever be performed by desig-
nated persons.
These operating instructions list the training requirements for the various
fields of activity, as follows:
•
instructed personnel
During a briefing by the operator, such persons have been instructed
about tasks assigned to them and about potential dangers in the event
of improper action.
•
Skilled personnel
Due to their specialist training, skills, and experience, as well as their
knowledge of the relevant regulations, such persons are able to perform
tasks delegated to them and detect any potential dangers on their own
initiative.
•
electricians
Due to their specialist training, skills, and experience, as well as their
knowledge of the relevant standards and provisions, such persons are
able to perform work on electrical systems and detect any potential
dangers on their own initiative.
In Germany, electricians must meet the specifications of the BGV A3
Work Safety Regulations (e.g. Master Electrician). Other relevant regula-
tions applicable in other countries must be observed.
2.5
Operational safety and particular hazards
Please observe the safety notes and the warnings listed here and in other
chapters of these operating instructions to reduce the possibility of risks to
health and avoid dangerous situations.
