SICK Omni CLX490 Series Скачать руководство пользователя

Страница: 59 / 158

Operating Instructions

Chapter

CLX490

8009237/RB47/2007-08-03

6-1

Operation

6.1

Overview of steps for starting up the CLX

•

Start up the CLX with the factory default settings (quick start).

With this configuration, the CLX can be operated without being connected to a PC.

•

Connect the PC (see

Chapter 5.5.6 Connecting the PC, Page 5-15

) and install the CLV-

Setup program (see

Chapter 10.6 Installing and operating the "CLV-Setup" program,

Page 10-15

•

Configure the CLX for the desired application.

6.2

Default settings

Table 6-1

contains an overview of the factory default settings for the CLX. The default para-

meters are such that the CLX can be put into operation either straight away or following a

few minor adjustments. A PC does not need to be connected to start up the CLX with the

default settings.

The default settings are stored permanently both in the ROM of the CLX and in the CLV-Set-

up database. They can be loaded to the RAM of the CLX at any time and displayed in the

tabs of the CLV-Setup program.

Displaying and printing out a complete set of default settings in CLV-Setup:

To save the current settings in the parameter set:

Choose F

ILE

and S

AVE

, and enter a file name in the dialog box that appears.

CLV-Setup saves the current settings in a configuration file with the extension "*.scl".

Click

in the toolbar.

CLV-Setup loads the default settings from its internal database and displays them in the

tabs.

Click

in the toolbar.

The P

RINT

FILE

dialog box is displayed.

If desired, a comment can be entered in the input field for the header of the printout.

Confirm the entry with OK.

The P

RINT

dialog box for configuring the printer then is displayed.

Make the appropriate entries in the dialog box and confirm these with OK.

CLV-Setup prints out the complete set of default settings in the form of a table. The header

contains the company and user names that were entered during the CLV-Setup installation

routine.

Содержание Omni CLX490 Series





























































































































































Результаты поиска

Содержание Omni CLX490 Series

Отзывы:

Похожие инструкции для Omni CLX490 Series

Бренды по названию

Популярные бренды

SICK Omni CLX490 Series, Руководство по эксплуатации

Результаты поиска

Содержание Omni CLX490 Series

Отзывы:

Похожие инструкции для Omni CLX490 Series

Бренды по названию

Популярные бренды